美國SKC PPI一次性采樣頭

美國SKC擁有，并行粒子撞擊器（PPI）特征在一個小取樣器四撞擊權力的ACGIH®/ ISO /呼吸性公約提供zui接近的匹配。四個沖擊器具有其自身的入口和出口孔大小適當?shù)膶崿F(xiàn)的切入點。每個沖擊器性能匹配一段采樣公約使整體取樣器的性能匹配整個選定的曲線。

美國SKC PPI一次性采樣頭性能簡介

采樣率：2升/分鐘的呼吸或8升/分鐘的呼吸

采樣泵：airchek 3000或通用的2升/分鐘，8升/分鐘

采樣時間：根據(jù)使用方法進行采樣

采樣介質：37毫米，5µ米PVC過濾器或37毫米，2µm聚四氟乙烯過濾器（NIOSH 5524）或37毫米，0.8µM MCE（硫酸）

PTFE過濾器的背壓可以在同一批次內變化。

管：¼英寸ID

撞擊基材：四3 / 8英寸直徑的前油多孔塑料盤（預裝在所有一次性PPIs）

分析：Gravimetric

尺寸：高度（夾排氣）：10.8厘米，直徑：4.6厘米，深度：3厘米

重量：一次性：31.2克

保質期：制造日期一年

英文資料：

SKC are proud to launch a new disposable thoracic sampler ideal for complying with the EU Workplace Exposure Limit for sulphuric acid mist.

In 2011 a new exposure limit was introduced which specified that samples taken must be in the thoracic size, rather than inhalable. In order to comply with this requirement, the Health & Safety industry has been seeking a thoracic sampler which doesn’t break the bank but gives reliable results, every time.

The SKC disposable Parallel Particle Impactor (PPI) is precisely engineered to match the convention curve for thoracic sampling better than any other sampler on the market. Available non-loaded or in a ‘plug-&-play’ model preloaded with filters and designed for single use, you can use our disposable PPI with any standard air sampling pump to take samples for analysis. It is also available in high-flow respirable models, ideal for taking samples of respirable particulates where increased sensitivity is required - such as for respirable crystalline silica.

Tested in the UK and USA, the disposable PPI is proven to be a simple and economic answer to thoracic and respirable particulate matter sampling.